Products

The 1107 Track-mounted Primary Jaw Crusher system from Northern Ireland based Fintec is tough enough for quarry duty, yet is fully transportable and designed to accept up to a 26-inch-wide feed, making it ideal for recycle and contract crushing.

The mobile Fintec 1107 utilizes a Sand-vik 1,100 mm by 700 mm (44-inch by 28-inch) single-toggle, hydraulic wedge-adjust jaw crusher with a symmetrical crushing chamber provided by an equal nominal and effective feed opening. A deflector plate at the top of the moving jaw allows all of the effective feed opening to be active – crushing the material from the very top of the chamber – and eliminates the need for a stationary cross wall in the feed area, which can reduce true feed allowance. The result is a feed opening that accepts large feed, ideal for conditions with large, slabby material that can often cause bridging and jaw plugging with a conventional opening. An optimized nip angle ensures that material progresses smoothly down the crushing chamber for high reduction, productivity and even utilization of the jaw plates.

Other key features of the 1107 jaw crushing system include: a compact design and transport-friendly weight on low-boy trailers; quick, easy setup for the track mounted plants; on site mobility using simple controls; CAT tier III engine; heavy-duty uniformly welded frame for high strength- and rigidity-to-weight ratios; The Sandvik-manufactured jaw on these plants also features a lubrication-free toggle plate and reversible jaw dies. Clamping bars that fix the jaw plate to the crusher are not only easy to install, but along with the support bars are replaceable, reducing total life cycle costs for the crusher. An optional overband magnet system is available.

1080 track-mounted cone crusherFintec also recently released its 1080 Track-mounted cone crusher system. This mobile 385 hp secondary cone features high strength and high capacity with high-reduction performance, all-in feed, direct hydraulic drive and hydraulic closed-side setting and tramp iron relief, making it ideal for recycle and contract crushing. Hopper capacity is 6.5 cubic yards and the maximum feed opening is 7-1/2 inches.

Fintec Crushing and Screening Ltd.

Sandviken, SE, SE-811 81

• 

  [C&D Recycling]

  1440 impact crusher

  Fintec Crushing and Screening Ltd.

• 

  Track-mounted impact crusher makes debut

  Fintec Crushing and Screening Ltd.

• 

  [C&D Recycling | MSW Recycling | Organics Recycling | Organics Recycling | Screens | Screens | Screens | Shredders ]

  Versatile screen plants

  Fintec Crushing and Screening Ltd.

• 

  [C&D Recycling]

  Track-mounted cone crusher

  Fintec Crushing and Screening Ltd.

• 

  [C&D Attachments | C&D Recycling]

  Screening units provide up to 20 percent more area

  Fintec Crushing and Screening Ltd.